Backyard Bot HQ

Beatbot vs Aiper: Cordless Pool Robots Compared Model by Model

Beatbot vs Aiper, tier by tier: Scuba S1 vs Sora 10, S3 vs Sora 30, V3 vs AquaSense 2, plus skimmers. Runtime, warranty, recalls and Nov 2026 list prices.

Backyard Bot HQ is reader-supported: we may earn a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. How this works.

At the same list price, Beatbot usually gives you more battery, while Aiper often gives you more robot for less money once its regular sales kick in. At the entry level the Scuba S1 and Beatbot’s Sora 10 are priced almost level, so the cheaper one that week is the deal. From about $1,000 list and up, Beatbot’s Sora 30 and AquaSense 2 run longer per charge, and the AquaSense 2 carries a 3-year full-replacement warranty.

Pick the Aiper Scuba S1 if price decides it; pick the Beatbot Sora 30 or AquaSense 2 for longer runtime and a longer warranty.

The matchups, tier by tier

Both brands sell cordless robots that clean the floor, walls and waterline, and both now sell models that skim the surface too. The useful comparison is model against model at the same list price, not brand against brand.

Tier Aiper Beatbot Edge
About $700 list Scuba S1: $699.99, 1,600 sq ft, up to 180 min standard (270 Eco), 2-yr warranty Sora 10: $699, up to 4 h full clean (5 h floor only), 2-yr warranty Beatbot (full-clean runtime)
$800 to $1,000 list Scuba S3: $799.99, up to 180 min standard (240 Eco), 18 lb Sora 30: $999, 3,200 sq ft, up to 4.5 h full clean, 2-yr warranty Beatbot (runtime, coverage)
$1,100 to $1,300 list Scuba V3: $1,099.99, camera navigation, JetAssist waterline AquaSense 2: $1,298, 3,230 sq ft, wireless dock, 3-yr full replacement Beatbot (warranty)
Surface skimming robots Scuba V3 Ultra: $2,299.99, 3,875 sq ft, 8,500 GPH Sora 70: $1,499, up to 7 h surface mode, 3-yr warranty Beatbot (price)
Solar skimmer EcoSurfer S2: $399.99, 4 L bin, chlorine tablet holder iSkim: $499, 9 L bin Split (see below)

Specs and list prices checked 21 Nov 2026, from each brand’s US store and spec pages. Both stores showed sales that day: the Scuba S1 at $449.99, the S3 at $649.99 and the V3 at $799.99 on Aiper’s US store; the Sora 10 at $426 to $445, the Sora 30 at $649 and the AquaSense 2 at $799 on Beatbot’s US store.

That sale pricing matters more than the list prices. On 21 Nov 2026 a Scuba S1 cost $5 to $24 more than a Sora 10, depending on the Sora 10’s color, and the AquaSense 2 cost the same $799 as Aiper’s V3. Check both stores the week you buy, because the gap moves.

Entry level: Scuba S1 vs Sora 10

The Aiper Scuba S1 has the longer track record. It handles pools up to 1,600 sq ft (50 ft long), uses a 180-micron basket plus a 3-micron fine filter, and Aiper lists Automatic, Floor, Wall and Eco modes plus scheduled cleaning. One independent review of the original 2024 S1 found it climbed the walls regularly and worked through corners without getting stuck, but it took four cycles to leave the test pool spotless, and changing modes mid-cycle meant fishing it out with the hook first.

The Beatbot Sora 10 is newer and claims more battery: up to 4 hours for floor, walls and waterline, or 5 hours floor only. It also reaches platforms down to 12 inches of water and parks itself at the waterline for about 10 minutes when it’s done, so retrieval is easier.

Our pick at this tier is the Sora 10 for bigger pools and the S1 when it’s the cheaper of the two that week. Beatbot’s own pages give two coverage figures for the Sora 10 (2,600 and 3,229 sq ft), so treat its rated area as a rough guide.

Mid-range: Scuba S3 vs Sora 30

Aiper’s Scuba S3 is a light one. At 18 lb it’s easy to lift out, and Aiper rates it for up to 180 minutes in Standard mode or 240 in Eco, with 4,800 GPH of suction and horizontal waterline scrubbing.

The Beatbot Sora 30 is the stronger pick for a large pool. Beatbot rates it for pools up to 3,200 sq ft, up to 4.5 hours of floor, wall and waterline cleaning, a 5 L basket, and shallow platforms down to 8 inches. It floats to the surface when it finishes.

Skip the Sora 30 if your pool is under about 1,000 sq ft and you hate carrying a robot around. The S3 covers that size on one charge and is the lighter lift.

AI navigation and docks: Scuba V3 vs AquaSense 2

This is where the brands split by philosophy. The Scuba V3 bets on a front camera: Aiper’s VisionPath navigation recognizes debris and plans routes, and the V3 adds JetAssist waterline cleaning and charges on a dock. The Beatbot AquaSense 2 skips the camera and leans on battery and warranty instead. Beatbot rates it for up to 4 hours on the floor or 3.5 hours for floor, walls and waterline combined, and it charges on a wireless magnetic dock.

The deciding line is the warranty. Beatbot backs the AquaSense 2 with a 3-year full-machine-replacement warranty, while Aiper’s warranty table lists 24 months for the V3. With battery robots, a third year of cover is worth real money.

For most buyers at this price, the AquaSense 2 is the safer buy and the V3 is the more interesting one.

Surface skimming robots: Scuba V3 Ultra vs Sora 70

If you want one robot that also skims floating leaves, Beatbot is far cheaper. The Sora 70 lists at $1,499 and claims up to 7 hours in surface mode, a 6 L basket and a 3-year warranty. Aiper’s Scuba V3 Ultra lists at $2,299.99, rates up to 3,875 sq ft with 8,500 GPH dual-pump suction. Its store page mentions both a 2-year and a 3-year warranty, so confirm the term before you buy.

At the top end, Beatbot’s AquaSense 2 Ultra ($3,150 list) competes more directly with the V3 Ultra. One independent review liked its cleaning and surface parking but found it heavy at about 29 lb, unable to clean steps or a tanning ledge, and out of Wi-Fi reach while underwater. Another reviewer felt its suction and wall climbing weaken late in a cycle as the battery ran down.

Skimmers: EcoSurfer S2 vs iSkim

For skimmers, the strongest evidence is one long video review that ran seven solar skimmers side by side, with a written version of the same test. In its one-hour debris run, Beatbot’s iSkim caught 18 of 20 leaves and picked up ground foam very well. The Aiper EcoSurfer S2 caught 15 leaves but collected the most foam of any skimmer tested.

It was also the most efficient skimmer, using about 3.46% of its battery per hour, so it needs roughly 5.7 hours of full sun a day to run nonstop versus about 6.6 hours for the iSkim. The tester ranked the iSkim best overall and called the S2 the best pick for screened or low-sun pools. Two practical notes: the iSkim’s wall charger costs extra, and the S2 holds a 3-inch chlorine tablet.

Our take: pick the iSkim for open, leafy pools in full sun and the S2 under a screen enclosure or partial shade. Aiper lists the S2 at $399.99 and Beatbot lists the current iSkim at $499 (Nov 2026). Beatbot’s older iSkim Ultra was listed as unavailable on its US store.

Safety records and what owners report

Aiper has two CPSC recalls on older cordless robots. In August 2023 it recalled about 22,000 Elite Pro (GS100) units because the battery could overheat if charged without the adapter. In March 2025 it recalled about 32,660 Seagull Pro (ZT6001) units after 19 reports of the robots melting, smoking or catching fire while charging (the adapter can overheat); the remedy was a free Scuba S1. Neither recall covers the current Scuba lineup. A search of the CPSC database on 21 Nov 2026 returned no Beatbot recalls.

Owner reviews on independent review platforms tilt the same way, though the samples are small and self-selected. Among recent Aiper reviews, roughly half are negative, and the most common complaints are units that stopped working within weeks or months and slow warranty, repair or refund handling. Aiper’s replies are often templated. Recent Beatbot reviews skew positive: owners still report units that stopped charging after months or a couple of years, but most say Beatbot replaced them quickly, sometimes with a newer model. Treat these patterns as a guide rather than a verdict.

What about Dolphin and Wybot?

If you’re weighing Beatbot vs Aiper vs Dolphin, Dolphin’s cordless line costs more for less battery but carries a longer service history. The Dolphin Liberty 400 lists at $1,549 on Maytronics’ US store with a 3-year warranty and a 2.5-hour default cycle. Dolphin’s corded robots remain the choice if you never want to charge anything.

Wybot is the other name in many Beatbot vs Aiper vs Wybot searches. Its maker, Wybotics, recalled about 5,000 robotic pool vacuums in April 2026 over lithium-ion batteries that can overheat, so check the model and the CPSC notice before buying one.

Choose Aiper if

  • Your budget tops out around $500 to $700 and the Scuba S1 or S3 is on sale.
  • Your pool is under 1,600 sq ft and you want a light robot (the S3 is 18 lb).
  • You want a camera-guided robot at the V3’s price.
  • Your skimmer sits under a screen or in part shade (EcoSurfer S2).

Choose Beatbot if

  • Your pool is over about 1,600 sq ft and you want more battery per charge.
  • You want a 3-year warranty on a mid-priced robot (AquaSense 2 at $1,298 or Sora 70 at $1,499 list).
  • You want surface skimming built into the robot without paying V3 Ultra money (Sora 70).
  • You’d rather buy from the brand with no CPSC recalls on file.

Beatbot vs Aiper FAQ

Is Beatbot better than Aiper?

For pools over about 1,600 sq ft, mostly yes: Beatbot’s Sora and AquaSense robots claim more runtime at similar list prices, and the AquaSense 2 and Sora 70 carry 3-year warranties. For small pools on a tight budget, Aiper’s Scuba S1 is the better deal when it’s on sale.

Which is better for a pool with a lot of floating leaves?

A dedicated skimmer catches leaves before they sink. In one side-by-side video test, Beatbot’s iSkim caught more leaves than Aiper’s EcoSurfer S2, while the S2 picked up more fine foam and needed less sun.

Bottom line

Measure your pool, then match the tier. Under 1,600 sq ft and under $700, buy whichever of the Scuba S1 and Sora 10 is cheaper that week. Bigger pools, or anyone who wants three years of cover, should start with the Sora 30 or AquaSense 2. Not sure which size you need? The pool robot match tool sorts models by pool size and shape.