Backyard Bot HQ

Review

Aiper Scuba X1 Review: Strong on Sale, Heavy to Live With

Buy the Aiper Scuba X1 on sale for a mid-size in-ground pool up to 2,150 sq ft; skip it at full list or if lifting 24 lb is hard.

By Shaker Abu Drais Updated

Aiper Scuba X1, official product photo
Image: Aiper
Cleans
floor, walls, waterline
Runtime
3 h
Pool size
2,150 sq ft
Pools
inground

Buy it for

In-ground pools up to 2,150 sq ft, bought at a sale price

Skip it if

You want camera navigation or a light, easy-to-lift robot

What's good

  • 6,600 GPH suction with front and rear rollers
  • Horizontal waterline scrubbing about 2 in above the water
  • 5 L basket plus a spare 3-micron fine filter
  • Covers pools up to 2,150 sq ft and 66 ft long

What to weigh

  • 24.25 lb dry and much heavier full of water
  • No mapping, camera or debris detection
  • Struggles on pool stairs
  • No app control underwater without the paid HydroComm Pro

$1,500

Aiper US list price, Nov 21, 2026

Backyard Bot HQ is reader-supported: we may earn a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. How this works.

At its Nov 2026 sale price, yes, for a mid-size in-ground pool. The Scuba X1 has strong suction, a big 5 L basket and good waterline scrubbing, and it covers pools up to 2,150 sq ft. At its $1,499.99 list price it’s hard to justify, because it has no camera or mapping and it’s heavy to haul out every time.

Buy the Aiper Scuba X1 on sale for a mid-size in-ground pool up to 2,150 sq ft; skip it at full list or if lifting 24 lb is hard.

Who the Scuba X1 fits

Aiper rates the X1 for in-ground pools up to 2,150 sq ft and 66 ft long, on concrete, fiberglass, vinyl or tile. It cleans the floor, walls and waterline. It doesn’t skim the surface.

That makes it a fit for a family-size pool with a mix of leaves, sand and dirt on the bottom. One independent review ran it all summer in a curved 20 by 50 ft in-ground pool and found it handled the curves fine and left the pool noticeably cleaner. Heavy debris sometimes needed two passes.

What it doesn’t suit is anyone who struggles with lifting. It weighs 24.25 lb dry, and it holds water when you pull it out.

How it cleans and finds its way

The X1 runs four motors, front and rear rollers and 6,600 GPH of rated suction. That’s more than the newer Scuba V3’s 4,800 GPH. Aiper’s WavePath 3.0 picks different cleaning patterns for floors and walls, and 14 sensors, including ultrasonic ones, slow it down before it hits obstacles.

There’s no camera, no pool mapping and no debris detection. Aiper’s own spec table marks all three as absent on the X1. It cleans by pattern, not by looking for dirt.

The waterline is its best trick. It scrubs horizontally up to about 2 inches above the water, and the reviewer who used it all summer found that worked well.

Filtration is two-stage: a basket for leaves and sand, plus a MicroMesh fine filter rated to about 3 microns. A spare fine filter comes in the box.

What reviewers and owners found

Reviews split into two camps.

The positive camp found it a capable, well-rounded cleaner. Floors and walls came out clean, setup was easy and the waterline scrubbing earned praise. The summer-long review liked it more than the tester’s older Polaris.

The critical camp compared it with corded robots and came away unimpressed. One specialist reviewer, who has tested dozens of pool robots, found leaves swirling around the 7.75-inch intake, fine silt needing several cycles and the fine filter harder to rinse than it should be. A side-by-side video of the X1 family measured suction at only 1.0 to 1.3 PSI against 2.2 PSI for a corded Dolphin Premier.

Even the positive summer-long review flagged some everyday hassles:

  • Weight and retrieval. Hauling a wet robot out with a pole and hook is awkward.
  • Stairs. That reviewer found pool stairs were its one real struggle.
  • Frequent emptying. The 5 L basket needed emptying after nearly every run, and the robot sometimes needed recharging two or three times a week.
  • Underwater control. Without the optional HydroComm Pro, the app can’t reach the robot once it’s submerged. In that review, it could finish on the pool floor and need fishing out with the hook.

Among Aiper owners more widely, reviews from October and November 2026 complain about units that stopped charging or powering on, slow repairs and replacement units that also failed. One X1 owner reported a battery over-temperature error. Others praise easy cleaning and fast delivery. Weigh support quality as part of the price.

Running costs, warranty and the fine print

The X1 lists at $1,499.99 on Aiper’s US store (Nov 2026) and was on sale for $749.99 there on Nov 21, 2026. Aiper also sold an X1 and EcoSurfer S2 skimmer bundle for $1,049.99 that day, which covers the X1’s missing surface cleaning.

There’s no subscription. Aiper’s US warranty is 24 months on the X1, and its filters count as consumables with a 3-month use period. The charging dock and hook carry 6 months. Charging takes about 4 hours, and the robot should be dry before it goes on the dock. It gets firmware updates over the air.

No recall covers the X1. Aiper recalled the Elite Pro in 2023 and the Seagull Pro in 2025 over overheating, which is background worth knowing for any lithium-ion pool robot.

Scuba X1 vs the alternatives

Model Pool size Suction Weight Camera
Scuba X1 2,150 sq ft 6,600 GPH 24.25 lb No
Scuba V3 1,614 sq ft 4,800 GPH 18.2 lb Yes
Scuba X1 Pro Max 3,230 sq ft 8,500 GPH 33.07 lb No

Specs and list prices checked 21 Nov 2026.

Pick the Aiper Scuba V3 if your pool is under about 1,600 sq ft. It’s 6 lb lighter and its camera targets dirt instead of following a pattern.

Pick the Scuba X1 Pro Max if you want skimming and ultrasonic pool mapping in one robot, and you can lift 33 lb. Aiper’s store marks it as phase-out.

If cordless charging and lifting are what put you off, a corded robot like the Dolphin Premier avoids both.

Who should buy it, and who should skip it

Buy the X1 if you have an in-ground pool between about 1,600 and 2,150 sq ft, you can catch it at a deep discount and you don’t mind lifting a heavy robot several times a week.

Skip it if you want camera navigation, if your pool has long stair runs, or if a 24 lb wet robot is too much to lift. Skip it at full list price too: at $1,499.99, you’re paying for features it doesn’t have.

Bottom line

The Scuba X1 is a solid cleaner that’s priced right only on sale. At $749.99 it’s good value for a mid-size pool. If you’re choosing between it and the V3 for a smaller pool, the lighter, smarter V3 is the better daily companion.

Full specs

TypeCordless robot
StatusOn sale
US list price$1,500 (Aiper, Nov 21, 2026)
Pool typesinground
Cleansfloor, walls, waterline
Max pool size2,150 sq ft
Runtime3 h (Up to 180 min.)
Chargingcharging dock, 4 h
Show all 15 specs
Finest filter3 microns
Filter capacity5 L
NavigationWavePath (14 sensors)
AppYes
Weight24.25 lb
Warranty2 years
RecallsNo CPSC recall found for this model (CPSC recall database checked 2026-11-21). Aiper brand recalls: (1) Elite Pro cordless pool vacuum, model GS100, about 22,000 units, Recall Alert dated 2023-08-24 (battery overheating when charged without adapter) https://www.cpsc.gov/Recalls/2023/Aiper-Elite-Pro-Cordless-Robotic-Pool-Vacuum-Cleaners-Recalled-Due-to-Burn-and-Fire-Hazards-Distributed-by-Shenzhen-Aiper-Intelligent-Co-Recall-Alert ; (2) Seagull Pro, model ZT6001, about 32,660 units, recalled 2025-03-20 (charging adapter can overheat; remedy was a free Scuba S1) https://www.cpsc.gov/Recalls/2025/Aiper-Seagull-Pro-Cordless-Robotic-Pool-Vacuum-Cleaners-Recalled-Due-to-Burn-and-Fire-Hazards-Distributed-by-Shenzhen-Aiper-Intelligent-Co

From Aiper's published specifications (official page). "Not stated" means the brand doesn't publish it.

Also worth a look