Review
Beatbot Sora 70 Review: The All-in-One Beatbot Most Pools Should Buy
The Sora 70 is our pick for most pools up to 3,200 sq ft that get floating leaves; skip it for petal-heavy surfaces or if lifting 23 lb is hard.
By Shaker Abu Drais Updated

- Cleans
- floor, walls, waterline, surface
- Runtime
- 7 h
- Pool size
- 3,229 sq ft
- Pools
- inground, above-ground
Buy it for
Pools up to 3,200 sq ft with floating leaves and a tanning ledge
Skip it if
Your surface debris is mostly light petals, or lifting 23 lb is hard
What's good
- Skims the surface and cleans floor, walls and waterline
- Cleans shallow ledges down to 8 in
- 6 L basket, the largest in the Sora line
- 3-year warranty at a mid-range price
What to weigh
- Slow, and leaves some debris in corners
- Jets can push light petals away
- Sinks if the battery dies; heavy when waterlogged
$1,499
Beatbot US list price, Nov 21, 2026
Backyard Bot HQ is reader-supported: we may earn a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. How this works.
Yes, buy the Sora 70 if your pool is up to about 3,200 sq ft and collects floating leaves, especially if it has a tanning ledge. It’s the only Sora model that skims the surface, it cleans ledges down to 8 inches, and it carries Beatbot’s 3-year warranty for $1,499 list ($999 on Beatbot’s US store on Nov 21, 2026). It’s slow, though, and it isn’t a match for a dedicated skimmer on light petals.
The Sora 70 is our pick for most pools up to 3,200 sq ft that get floating leaves; skip it for petal-heavy surfaces or if lifting 23 lb is hard.
What the Sora 70 cleans
Five zones: the water surface, floor, walls, waterline and shallow platforms. It works in in-ground and above-ground pools of any common shape and in saltwater under 5,000 ppm. Beatbot rates it for pools up to 3,229 sq ft.
Surface cleaning is the reason to pick it over the Sora 30. Its JetPulse system uses two side jets that push water in coordinated streams to steer floating debris toward the intake. It can skim for up to 7 hours, and you can steer it from the app while it’s on the surface.
Ledges are the other win. A downward ultrasonic sensor lets it clean platforms in water as shallow as 8 inches, as long as the platform is about 3.3 by 3.3 ft or larger. One reviewer in a Southern California pool saw it handle the steps and the Baja shelf.
Does JetPulse skimming work?
On heavy leaves, yes. One reviewer watched it pull thick oak leaves into the intake and shrink the floating ring of debris. On light debris, less so. Two reviewers found the jets pushed petals and thin leaves away, and some of that sank before the robot came back around. Customer feedback summaries mention the same thing with waterlogged petals.
So if your surface problem is oak or maple leaves, it helps a lot. If it’s a constant drift of flower petals or pollen, a dedicated skimmer that floats all day does better, and one reviewer paired it with one.
Floor, walls and day-to-day use
Underwater it’s thorough but slow. One reviewer said it “moves at a slow crawl” in a large pool. Another found a thorough floor pass over oak leaves took close to six hours, and in Pro Mode it left about a tenth of the debris, mostly tucked into corners. On fine sand, a single pass picked up nearly all of it. A reviewer who has used several robots said it consistently cleaned better than the others she’d tried, though it didn’t catch every seed pod.
The hardware: 6,800 GPH of suction, 18 sensors, eight motors, a 10,000 mAh battery and a 6 L basket with a 150-micron filter. Battery life holds up. One reviewer got about 4.5 hours on the floor plus roughly an hour of surface work, close to Beatbot’s ratings. Charging takes about 4.5 hours on the 65 W plug, with no dock to find room for.
Retrieval is the chore. When it finishes or runs low, it surfaces at the edge and drains, so you can lift it one-handed when it works. If the battery dies first, it sinks and you’ll need a pole with a hook. At 22.9 lb it’s still heavy when full of water. One reviewer had a couple of close calls being pulled toward the pool, and another reviewer’s in-laws found it hard to lift out of their above-ground pool.
What critics and owners complain about
A specialist video reviewer, who favors corded robots, didn’t like the build: side panels on the tracks popped off during unboxing, the single power switch gave confusing feedback, there’s no weekly timer, and the mesh filter misses fine debris. Beatbot sells an optional 3-micron ultra-fine basket for $59.99 (Nov 2026), rated for about 40 cycles and not meant for surface mode.
Customer feedback summaries repeat the weight complaint and mention some owners getting stuck on stairs, which recent firmware appears to have improved. Owner reviews of Beatbot overall often describe robots that stopped charging and were replaced quickly by support, with a minority unhappy about slow replies.
Price, warranty and fine print
- Price: $1,499 MSRP (Beatbot, April 2026); $999 on Beatbot’s US store on Nov 21, 2026.
- Warranty: 3 years on the main body, versus 2 years on the Sora 30 and Sora 10; 3 months on the basket and roller brush. 30-day return window.
- Running costs: none required; the ultra-fine basket is optional.
- Recalls: none for Beatbot in the CPSC database as of Nov 21, 2026.
Sora 70 vs Sora 30, AquaSense X and a two-robot setup
| Sora 70 | Sora 30 | AquaSense X | |
|---|---|---|---|
| List price, Beatbot US | $1,499 | $999 | $4,250 |
| Surface skimming | Yes, up to 7 h | No | Yes |
| Shallow ledges | Down to 8 in | Down to 8 in | From about 14 in |
| Basket | 6 L | 5.2 L | 5 L plus 22 L station bin |
| Warranty | 3 years | 2 years | 3 years |
Specs and list prices checked 21 Nov 2026.
Pick the Sora 30 if nothing floats in your pool: same suction, battery and 8-inch ledge reach for $500 less at list, with a shorter warranty. Pick the AquaSense X with its self-rinsing dock only if you never want to rinse a basket and can pay for it. For a pool buried in leaves every day, Beatbot’s own comparison favors an AquaSense 2 floor robot plus the iSkim Ultra solar skimmer, which also adds clarifier dosing.
Who should buy it, and who should skip it
Buy the Sora 70 if you want one robot for the surface, floor, walls and a tanning ledge, your debris is mostly leaves rather than petals, and you can lift about 23 lb out of the water.
Skip it if light petals or pollen are your main surface problem, if speed matters (it’s slow), or if you can’t handle a waterlogged robot at the edge. Skip it too if you’d rather have a corded robot running on a weekly timer.
The practical bottom line
For most pools, the Sora 70 is the Beatbot to buy: it does more than robots costing twice as much, and the 3-year warranty is a real advantage over the cheaper Soras. Buy it on sale, keep a hooked pole nearby for the rare dead-battery day, and rinse the basket after each run.
Full specs
| Type | Cordless robot |
|---|---|
| Status | On sale, 2026 |
| US list price | $1,499 (Beatbot, Nov 21, 2026) |
| Pool types | inground, above-ground |
| Cleans | floor, walls, waterline, surface |
| Max pool size | 3,229 sq ft |
| Runtime | 7 h (Up to 7 h surface; up to 5 h floor (Eco)) |
| Charging | Not stated, 4.5 h |
Show all 15 specs
| Finest filter | 150 microns |
|---|---|
| Filter capacity | 6 L |
| Navigation | Not stated |
| App | Not stated |
| Weight | 23.1 lb |
| Warranty | 3 years |
| Recalls | None found on cpsc.gov (checked Nov 21, 2026) |
From Beatbot's published specifications (official page). "Not stated" means the brand doesn't publish it.



