Backyard Bot HQ

Navimow Not Charging: Causes and Fixes by Model

Navimow not charging? Read the dock light first, then clean the strips, level the station, check the cable and temperature. Fixes for X4, i2, H2 and X3.

Backyard Bot HQ is reader-supported: we may earn a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. How this works.

When a Navimow won’t charge, the light on the charging station usually tells you why. No light means no power is reaching the station. A blue light with the mower docked points to dirty or blocked charging strips, and a red light means the mower and station aren’t talking, often because the mower is switched off.

Check the dock light first, then clean the charging strips and the mower's port; that covers the causes Navimow's support pages list first.

Read the charging station light

What you see What it means First thing to try
No light at all No power at the station Test the outlet with another device, then reseat the power cable
Blue, mower sitting on the dock Station has power but the mower isn’t taking a charge Clean the charging strips and the mower’s charging port
Solid red No communication between mower and station Make sure the mower is switched on
Charging protection icon in the app Battery is too hot or too cold to charge Wait for the temperature to come back into range

Navimow documents these lights for older models (i1, H1) in detail. Newer support pages for the X4, i2 AWD and H2 just tell you to check that the status light looks normal, so use this table as a guide rather than gospel.

Safety first

Unplug the charging station before you clean the strips or touch the contacts. Use only the charging cable made for your model, because Navimow’s support pages for the X4, i2 AWD and H2 all warn against using a cable from a different Navimow. If the battery seems damaged, swollen or very hot, stop and contact support. Navimow says not to take the battery pack apart.

Fixes in order, easiest first

1. Get power to the station

If the dock is dark, plug a lamp or phone charger into the same outlet. Outdoor outlets are often on a GFCI, so check whether it has tripped. If the outlet works, check that the power cable is pushed fully into the station and the power supply. A station that stays dark with a working outlet and a seated cable probably has a hardware fault, and that’s a support call.

2. Clean the charging strips and the port

This is the most likely fix. Grass clippings, dust and grime build up on the metal strips on the dock and the contacts on the mower. Navimow’s pages for the X3, X4, i2 AWD and H2 all say to look for corrosion or damage on both. Our advice is to wipe them with a dry cloth or soft brush rather than hosing them down or using solvents.

For error code 9111 (mower charging error) on the i2 AWD and H2, Navimow’s fix starts here too: clear the clippings around the charging port so the contacts meet properly.

3. Level and anchor the dock

If the dock is tilted, the mower can sit slightly off its contacts. Navimow’s 9111 guidance asks for the station to sit firmly on a flat, stable surface so the mower rests steadily on it. One independent X430 review notes the station needs level ground with about 6.6 feet clear in front, and that Navimow includes six ground nails to pin it down. Hammer them back in if frost or wet soil has loosened the base.

If the light is red: wake the mower up

A solid red light is normal when the mower is switched off, so turn it on and give it a minute. Navimow says brief interference can also cause a red light that clears by itself. If the red light keeps coming back while the mower is on and sitting properly on the dock, treat it as a hardware fault and contact the seller or support.

4. Check the cable is the right one

If you own more than one Navimow, or bought a spare power supply, check the label. Navimow is clear that each model needs its own official charging cable.

5. Rule out temperature

Navimow lists a working range of 32 to 104°F (0 to 40°C) for the i2 AWD, and its H2 overheating guidance uses the same 0 to 40°C. Outside that range the mower may stop mowing or charging to protect itself. On older models such as the i1, the app shows a charging protection icon when this happens. Heat counts as much as cold. The H2 even has its own code, error 2105 (battery temperature too high): move the mower into shade, let it cool, then press STOP.

In cold snaps, wait for the day to warm up. If it’s late in the season, it may be time to put the mower away for winter.

6. Make sure it’s really not charging

Charging takes a while, so don’t judge it after ten minutes. One independent review found the X430 takes roughly 90 minutes to recharge. In one independent group test, the i215 needed a full two hours to reach 100%. A slow climb in the app is normal.

Model-by-model notes

Navimow family Models in the family What Navimow’s support pages add
X4 X430, X450 Check power, status light, strips and port; use the official X4 cable. Dark station: test the outlet, then the cable.
i2 AWD i206 AWD, i210 AWD Same checks; error 9111 means a charging failure. Works from 32 to 104°F. Place the dock in an open, flat spot.
H2 H210, H220 Same checks; 9111 for charging failures, 2105 for an overheated battery.
X3 X390 Check power, status light, strips and port.
i1 and H1 (older) Earlier models Blue light while docked: clean the strips. Solid red: the mower is off or can’t talk to the station. Charging protection icon: temperature.

Notes checked 21 Nov 2026.

What owners report

Charging complaints show up now and then in Navimow’s customer reviews. One i110 owner wrote in November 2026 that the original charger shorted out after about a year. Getting a replacement charging unit went smoothly, and Navimow apologized for the early failure. If your station or power supply dies outside the first season, it’s worth asking support about a replacement before you buy a new one.

How to stop it happening again

Several of the causes Navimow lists come down to dirt on the contacts or a dock that isn’t level, so a little routine goes a long way. Brush the strips and the mower’s contacts whenever you clean the deck. After heavy rain or a frost, check that the dock still sits flat and the ground nails are tight. And keep the space in front of the dock clear of toys, hoses and fallen branches so the mower can drive straight on.

When to contact Navimow support

Contact support if the station stays dark on a working outlet, if a solid red light keeps coming back with the mower switched on, or if 9111 returns after cleaning and leveling. US owners can email navimowsupport-us@rlm.segway.com.

Have these ready:

  • The serial number, from the app under Settings, then Mower, then Basic Info
  • The date and time the mower failed to charge
  • A short video or photo of the mower on the dock

The seller you bought from can also arrange an inspection and repair. For the full lineup and current models, see our Navimow brand page.

Bottom line

Work from the light outward: power, then the strips, then a level dock, then the cable and the weather. If all five check out and the mower still won’t take a charge, it’s a hardware problem, so send support a video and the serial number.